IATF16949 Takaddun Sassan Mota Mai Takaddun Shaida Mota Mai Bayyanar Ciki Mai Gyaran Roba
Murfin hasken dare mai haske a cikin mota murfi ne mai haske da ake amfani da shi don tsarin hasken cikin mota don kare hasken dare da kuma samar da tasirin haske. Murfin hasken dare mai haske yawanci ana yin sa ne da kayan filastik masu haske, kamar PC (polycarbonate) ko PMMA (polymethylmethacrylate).
Tsarin ƙera allurar don ƙera murfin haske mai haske na dare don kayan cikin motoci shine kamar haka:
Tsarin Motsa Jiki: Yi ƙirar mold bisa ga buƙatun ƙira da ƙayyadaddun bayanai na murfin hasken dare mai haske. Tsarin ya haɗa da tsarin mold, ramin mold, tsarin sanyaya, tsarin fitar da hayaki, da sauransu.
Shirya kayan aiki: Zaɓi kayan filastik mai haske wanda ya dace da ƙera allura, sannan a shirya abin da ake buƙata Kayan Motsawas, kamar ƙarfe.
Sarrafa molds: Sarrafa molds da ƙera su bisa ga zane-zanen ƙira. Wannan ya haɗa da injinan CNC, EDM, yanke waya da sauran hanyoyin aiki.
Haɗa mold ɗin: Haɗa sassan mold ɗin da aka sarrafa, gami da ramin mold, tsarin sanyaya, tsarin shaye-shaye, da sauransu.
Gyara da Gwaji: Gyara da gwada gyaran da aka haɗa domin tabbatar da aikin gyaran da kuma ingancin gyaran allurar.
Shirya kayan filastik: Zafafa barbashin filastik masu haske zuwa zafin da ya dace domin su narke.
Gina allurar: A zuba robar da aka narke a cikin ramin mold. Ta hanyar sarrafa matsin lamba da zafin jiki na injin ƙera allurar, robobin yana cika ramin mold ɗin gaba ɗaya kuma yana tauri yayin sanyaya.
Buɗe mold ɗin kuma cire sassan da aka yi wa allurar: Bayan sassan da aka yi wa allurar sun yi sanyi kuma sun yi ƙarfi, buɗe mold ɗin kuma cire sassan da aka yi wa allurar.
Dubawa da gyarawa: Duba sassan da aka yi wa allurar don duba girma, kamanni da inganci, da sauransu. Gyara da kuma bayan an gama aiki idan ya cancanta.
Kulawa da Kulawa: Kulawa da kula da ƙwayoyin allura akai-akai, gami da tsaftacewa, shafa mai, maye gurbin sassan da suka lalace, da sauransu, don tabbatar da amfani da ƙwayoyin halitta na dogon lokaci.
A cikin tsarin allurar mold don kera murfin haske na dare mai haske ga kayan cikin mota, ya kamata a mai da hankali kan zaɓi da sarrafa kayan filastik masu haske don tabbatar da gaskiya da ingancin sassan da aka yi allurar. A lokaci guda, ya zama dole a tsara tsarin mold da tsarin sanyaya da suka dace bisa ga buƙatun tsarin allurar don inganta inganci da ingancin samarwa na sassan da aka yi allurar. Da fatan za a aiko mana da saƙo (Imel: info@ansixtech.com) a kowane lokaci kuma ƙungiyarmu za ta amsa muku cikin awanni 12.
| Bayanin Mold | |
| Kayan Samfura: | Kwamfuta |
| Kayan Motsa Jiki: | 2344H |
| Adadin Kogo: | 1*2 |
| Hanyar Ciyar da Manne: | Mai gudu mai sanyi |
| Hanyar Sanyaya: | Sanyaya mai |
| Zagayen Gyaran Ginawa | 28.5s |
Tsarin Alamar Mold:
